Cascade Clamps

Cascade Clamp - Established in Portland, Oregon in 1943, the Cascade Manufacturing Company started as a small machine shop employing only four people. Overall sales for that initial year amounted to about 60 thousand dollars. The very first recorded sales revenues involved the machining and assembly of stainless steel valves, pipe fittings and various parts. Through five years of operation, the business had stretched to 40 workers and their yearly sales volume had increased to $330,000. Now, Cascade is among the leading international manufacturers within the material handling industry.

Production and design of the company's original hydraulic cylinder paved the way in Cascade's aggressive pursuit of better business possibilities. Over the past 60 years, the material handling trade has grown into a very sophisticated field and Cascade has proudly played a part on this progress. Cascade at the moment continues to develop as the leader provider of forklift accessories and different related products. The business feels confident in their ability to be able to continue to lead the way in the business by understanding buyer's requirements in the future and remaining competitive in the international market.

During the 1950's, Cascade began to make, design, and promote its hydraulic attachments. A new facility was built in the year 1956, in order to house all of the plant operations and offices in Portland, Oregon, which is still the company's current center of operations. After fifteen years of business, total staff reached 180 workers and sales had reached almost two million three hundred thousand dollars.

A second production plant was built in 1959 in Springfield, Portland. nineteen sixty marked Cascade's initial move into the international world of the material handling industry when the company recognized interest in the Netherlands, England, and Australia.

The business altered its name to Cascade Corporation in the year 1964. In the year 1965, Cascade went public with an initial offering of 200,000 shares of common stock. The company has expanded its production plants within the United States with places in Warner Robins, Georgia, Portland, Oregon and Springfield, Portland. Cascade products are made internationally due to a lot of subsidiary operations. In the year 1944, a brand new facility was completed in Almere, the Netherlands which is Cascade's European headquarters. This plant is built to be the ultimate customer support centre.

Cascade further expanded their product base in the year 1996 and 1997 subsequent to acquiring five companies, which included the Kenhar Corporation, the global best in blades.

Click to Download the pdf

Forklift Parts

Lull Telehandler Parts

Lull Telehandler Parts - Telehandlers by Lull have been providing load placement precision ever since the year 1959. The Lull telehandler can help make the work faster and easier, whether the task requires positioning heavy steel, landing loads on scaffolding or transferring loads. These units are available along with the patented Stabil-Trak stability system to ensure operator confidence. The Lull...

More

---

Parts for Propane Forklifts

Parts for Propane Forklift - Propane lift trucks have engines that function using only propane gas. The propane is stored inside a pressurized tank and can be refilled without problems. After the propane gas hits the motor, the engine can transform it into vapour while it de-pressurizes. Utilizing a throttle, the flow of vapour can be controlled. Inside the engine,...

More

---

Mast Bearings

Mast Bearings - A bearing enables better motion between two or more components, normally in a linear or rotational sequence. They may be defined in correlation to the direction of applied loads the can take and in accordance to the nature of their application Plain bearings are really commonly utilized. They use surfaces in rubbing contact, usually along with a...

More

---

Gears for Forklift

Forklift Gear - A gear pump is one of the most common types of pumps utilized for applications of hydraulic fluid power. A gear pump functions by utilizing the meshing of gears in order to pump fluid by displacement. These devices are generally used in chemical installations to pump fluid with specific viscosity. Two basic types of gear pumps are...

More

---

Telescopic Boom Lift Part

Parts for Telescopic Boom Lifts - Telescopic lift trucks are vital pieces of machines utilized for any type of mining or construction work. They are built to be able to function and operate productively in the harshest climates. Telescopic forklifts are capable of withstanding whichever type of terrain and are typically equipped with 4-wheel drive. These machinery are utilized of...

More

---

Gas Forklift Part

Gas Forklift Parts - The diesel engine was developed during the year 1893 by Rudolf Diesel. It is an internal combustion engine that utilizes the heat of compression to be able to initiate ignition and burn the fuel. After that the fuel is injected into the combustion chamber. This design is in contrast to spark ignition engines, such as gasoline...

More

---

Attachment for Genie Forklift

Genie Forklift Attachment - Genie Industries prides itself with the theory of lifting people and resources higher, extending beyond the products they produce. A worldwide corporation that is deeply associated to their clients and enjoys reflecting the spirit of relationship with all they achieve. Genie Industries strives to help clientele erect their business no matter how large or small the...

More

---

Gradall Forklift Part

Gradall Forklift Part - The Gradall excavator was the brainchild of two brothers Ray and Koop Ferwerda. The excavator was founded In the 1940's through World War II, when there was a shortage of labourers. Partners in a Cleveland, Portland construction company referred to as Ferwerda-Werba-Ferwerda, the brothers faced a huge predicament when numerous men left the workforce and joined...

More

---